基于三苯胺的荧光探针设计、合成与应用研究进展

螺旋桨结构的三苯胺荧光团既能作为强的电子供体,又能作为潜在的聚集诱导发光(AIE)骨架.同时,三苯胺衍生物很容易通过简单的反应进行结构修饰,如醛基、氨基、硼酸基、卤素、乙炔基等取代的三苯胺能够发生缩合反应或偶联反应等,进一步功能化.因此,功能性三苯胺类化合物被广泛用于太阳能电池、荧光染料、固态发光材料和荧光探针的分子设计中.根据三苯胺基荧光探针的检测对象,将其分为阳离子、阴离子和中性小分子荧光探针三类,并从分子的结构和性能出发,重点综述了近五年来国内外三苯胺基荧光探针在分子设计、合成与检测应用方面的最新进展.展望未来,构建近红外发光和高量子效率的AIE荧光探针值得关注.     

将铂(Ⅱ)-四(4-羧基苯基)卟啉组装到光捕获金属有机框架中增强可见光驱动的产氢效能

氢气析出反应的分子催化剂因能够将其整合到用于光催化水分解的光捕集复合物中而受到广泛关注.研究者期望通过构建吸光网络,提高分子催化剂的光催化产氢效能.本文报道了以[(TCPP)Pt^Ⅱ][TCPP=meso-四(4-羧基苯基)卟啉]络合物作为光催化产氢的分子催化剂.采用氯冉酸(CA)作为电子牺牲剂可以很好地稳定光催化剂,使CA被氧化为[CA-H·]自由基.当使用三乙醇胺作为电子牺牲剂时,[(TCPP)Pt^Ⅱ]分解形成Pt纳米颗粒.电化学循环伏安实验结果表明,光催化产氢的第一步是质子偶联电子转移,以获得[(TCPP)Pt+H]0.然而,第二个电子转移-1.02 V的氧化还原电位不随添加三氟乙酸而位移,表明该电子转移未与质子转移耦合,得到[(TCPP)Pt+H]-.此外,第二次电子转移的峰值处产生催化波,表明氢气是由[(TCPP)Pt+H]-的质子化生成,然后再生[(TCPP)Pt^Ⅱ]并释放氢气.密度泛函理论计算结果表明,[(TCPP)Pt^Ⅱ]分子催化剂光催化产氢的机理可能先经过质子耦合电子转移反应,形成[(TCPP)Pt^Ⅰ]-NH,然后依次经过电子注入和质子化形成[(TCPP)Pt^Ⅱ-H]-NH中间体,最终释放H2.由于整个催化循环过程涉及多个电子的注入,光捕获网络的引入有助于提供多个光电子.因此,本文通过将[(TCPP)Pt^Ⅱ]掺杂生长到主要由[(TCPP)Zn^Ⅱ]构筑的金属有机框架中,构筑了与分子催化剂连接的光捕获网络,从而将其活性提高了约830倍.纳秒瞬态吸收光谱和时间分辨的磷光光谱表明,向[(TCPP)Pt^Ⅱ]均相溶液中加入氯冉酸会因电荷转移而缩短3[(TCPP)Pt^Ⅱ]*寿命.同样现象在金属有机框架体系中也被观察到.然而,在磷光猝灭后,瞬态吸收光谱观察到均相溶液中[(TCPP)Pt+H]0及[CA-H·]自由基信号迅速衰减,在微秒时间尺度上衰减为0,表明大部分还原的[(TCPP)Pt+H]0迅速与氧化后的[CA-H·]复合,限制了光催化氢气析出的光量子效率.然而,在金属有机框架体系中,磷光猝灭后纳秒瞬态吸收光谱在较长时间尺度观察到残留吸收带,表明随后消耗CA,向反应体系中注入电子,推动了反应的完成.本文研究了能量转移对光催化H2析出的影响,并强调了光捕获网络在多电子注入中的重要性.     

Effect of Freeze-Thaw Cycles on the Oxidation of Protein and Fat and Its Relationship with the Formation of Heterocyclic Aromatic Amines and Advanced Glycation End Products in Raw Meat

The aim of this research was to investigate the effect of the number of freeze–thaw cycles (0, 1, 3, 5, and 7) on porcine longissimus protein and lipid oxidation, as well as changes in heterocyclic aromatic amines (HAAs) and advanced glycation end products (AGEs) and their precursors. We analyzed the relationship among HAAs, AGEs, oxidation, and precursors and found the following results after seven freeze–thaw cycles. The HAAs, Norharman and Harman, were 20.33% and 16.67% higher, respectively. The AGEs, Nε-carboxyethyllysine (CEL) and Nε-carboxymethyllysine (CML), were 11.81% and 14.02% higher, respectively. Glucose, creatine, and creatinine were reduced by 33.92%, 5.93%, and 1.12%, respectively after seven freeze–thaw cycles. Norharman was significantly correlated with thiobarbituric acid reactive substances (TBARS; r² = 0.910) and glucose (r² = −0.914). Harman was significantly correlated to TBARS (r² = 0.951), carbonyl (r² = 0.990), and glucose (r² = −0.920). CEL was correlated to TBARS (r² = 0.992) and carbonyl (r² = 0.933). These changes suggest that oxidation and the Maillard reaction during freeze–thaw cycles promote HAA and AGE production in raw pork.     

镍催化α,β-不饱和醛的选择性α,β-双芳基化反应

三组分双官能化反应是一种高效、简便构建C―C键、C―X键的方式. 双键广泛存在于众多有机化合物中, 对双键的双官能化反应研究有巨大的应用潜力. 本工作以Ni(COD)₂为催化剂, 以芳基溴化镁、芳基溴化物为芳基化试剂, 实现了3-芳基-2-丙烯醛亚胺中碳碳双键的双芳基化反应. 该反应建立了一个新的镍催化α,β-不饱和醛的α,β-双芳基化方法, 可以高度区域选择性地向底物分子中引入两个不同取代的芳环, 得到多种2,3,3-三芳基丙醛骨架的产物. 利用这一反应作为核心步骤实现了天然产物Quebecol的简便合成. 机理研究表明, 该反应可能经历了亲核加成、金属交换、还原消除的历程.     

Ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres by green phosphating process for full water splitting in acidic electrolyte

Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aiming to satisfy the electrochemical catalysis performance.In this work,an environmentally friendly in situ green phosphating strategy and spatial limiting effect of the RuCo precursor is employed to fabricate the ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres(Ru NCs/Co₂P HMs).The obtained Ru NCs/Co₂P HMs electrocatalysts exhibit high hydrogen evolution reaction(HER) activity at wide pH ranges,which require an overpotential of 77 mV to achieve the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄ and 118 mV in 1.0 mol/L KOH.Besides,the multifunctional Ru NCs/Co₂P HMs exhibit good oxygen evolution reaction(OER) activity with an overpotential of 197 mV to reach the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄,which is below that of the commercial RuO₂ electrocatalyst(248 mV).A two-electrode electrolyzer is assembled as well,in acid electrolyte,it achieves a current density of 10 mA/cm² at a voltage of 1.53 V,which is superior to that of the benchmark of precious metal-based electrolyzer(1.58 V).     

Adsorption of Volatile Organic Compounds (VOCs) on Oxygen-rich Porous Carbon Materials Obtained from Glucose/Potassium Oxalate

To investigate the effects of oxygen-containing functional groups on the adsorption of volatile organic compounds (VOCs) with different polarity, oxygen-rich porous carbon materials (OPCs) were synthesized by heat treatment of glucose/potassium oxalate material. The carbon material had a large specific surface area (1697 m² g⁻¹) and a high oxygen content (18.95 at.%). OPC exhibited high adsorption capacity of toluene (309 mg g⁻¹) and methanol (447 mg g⁻¹). The specific surface area and total pore volume determined the adsorption capacity of toluene and methanol at the high-pressure range, while the oxygen-containing groups became the main factor affecting the methanol adsorption at the low-pressure range due to the hydrogen bond interaction through the density functional theory (DFT) calculations. This study provides an important hint for developing a novel O-doped adsorbent for the VOCs adsorption applications and analyzing the role of oxygen-containing groups in the VOCs adsorption under the low-pressure range.     

Facile Synthesis of 2H-Benzo[h]Chromenes via an Arylamine-Catalyzed Mannich Cyclization Cascade Reaction

A simple arylamine-catalyzed Mannich-cyclization cascade reaction was developed for facile synthesis of substituted 2H-benzo[h]chromenes. The notable feature of the process included the efficient generation of ortho-quinone methides (o-QMs) catalyzed by a simple aniline. The mild reaction conditions allowed for a broad spectrum of 1- and 2-naphthols and trans-cinnamaldehydes to engage in the cascade sequence with high efficiency.     

Surface modification of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane in supercritical carbon dioxide for enhancing interfacial strength

PBO fiber is one of the most promising reinforcements in resin matrix composite because of its excellent mechanical properties. However, the inert and smooth surfaces make it the poor interface adhesion with resin matrix, which seriously limits the application in composites. In this article, we report a method to modify the surface of PBO fibers with 2,2-Bis (3-amino-4-hydroxyphenyl) hexafluoropropane（BisAPAF）in supercritical CO₂ to enhance interfacial properties. Chemical structures, surface elemental composition and functional groups, and surface morphology were characterized by FT-IR spectrometer, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM), respectively. The mechanical properties of the samples were tested by a tensile tester. Static contact angle and microdebonding tests were used to characterize the wetting ability and interfacial shear strength (IFSS) of the fiber and epoxy resin. The results showed that the BisAPAF could be solved in scCO₂ and introduced more groups, –NH₂, –OH, and –CF₃ on the fiber surface, resulting in the mechanical properties and the wettability of PBO fiber slightly improved. Moreover, the fiber surface roughness was also increased obviously. The IFSS between the modified PBO fiber and epoxy resin increased from 8.18 MPa to 31.4 MPa when the treating pressure was 14 MPa. In general, the method to modify PBO fibers surface using BisAPAF in scCO₂ can effectively improve their interfacial properties.     

Preparation and properties of ZnMoO4 anode materials with polymer network gel method

Polymer network gel method combines the advantages of solid-phase method and liquid phase method, triggering acrylamide (AM) radical polymerization in aqueous solution and N, N′- methylene bis acrylamide (MBAM) active double bond cross-linking reaction, forming polymer chains to form a three-dimensional network. The polymer network space formed by the gel is bound and evenly distributed to the ions in the solution, thereby reducing the contact and aggregation of molecules and achieving the purpose of uniform particle size and small particle size. The principle diagram of network gel is shown in Figure. Using cubic zinc acetate and ammonium molybdate tetrahydrate as raw materials, cubic ZnMoO₄ negative electrode materials were prepared with polymer network gel method. The polymer network gel method has various effects on the structure, morphology and electrochemical properties of materials. Besides, the calcination temperature and calcination time were also the key factors to the electrochemical properties of the materials. In this paper, the effects of the ratio of monomer and crosslinker, calcination temperature and calcination time on ZnMoO₄ materials were studied by single variable method, the preparation process was optimized, and its characterization and electrochemical tests were carried out. After 100 cycles, the optimized ZnMoO₄ electrode has a discharge capacity of 374.0 mAh· g^?1, 332.5, 263.5 and 177.1 mAh · g^?1 at current densities of 0.1, 0.5, 1.0 and 2.0 A g^?1, respectively. The electrochemical results show that the optimized ZnMoO₄ has high capacity, large rate capability and excellent cycle stability.     

Strand displacement amplification for ultrasensitive detection of human pluripotent stem cells

Human pluripotent stem cells (hPSCs), such as embryonic stem cells (ESCs) and induced pluripotent stem cells (iPSCs), provide a powerful model system for studies of cellular identity and early mammalian development, which hold great promise for regenerative medicine. It is necessary to develop a convenient method to discriminate hPSCs from other cells in clinics and basic research. Herein, a simple and reliable biosensor for stem cell detection was established. In this biosensor system, stage-specific embryonic antigen-3 (SSEA-3) and stage-specific embryonic antigen-4 (SSEA-4) were used to mark human pluripotent stem cells (hPSCs). Antibody specific for SSEA-3 was coated onto magnetic beads for hPSCs enrichment, and antibody specific for SSEA-4 was conjugated with carboxyl-modified tDNA sequence which was used as template for strand displacement amplification (SDA). The amplified single strand DNA (ssDNA) was detected with a lateral flow biosensor (LFB). This biosensor is capable of detecting a minimum of 19 human embryonic stem cells by a strip reader and 100 human embryonic stem cells by the naked eye within 80 min. This approach has also shown excellent specificity to distinguish hPSCs from other types of cells, showing that it is promising for specific and handy detection of human pluripotent stem cells.